Maintenance Made Easy
In addition to providing service or component specific maintenance we can also provide you with scheduled maintenance based on the changing seasons. Once you are added to our maintenance list you can just sit back and relax knowing your system is being monitored. Below you will find our suggested maintenance schedule.
Spring Start Up
At the start of the season we will do a thorough inspection of your irrigation or sprinkler system. Here is what we will do during our spring start up.
- Check the controller for correct set-up and operation
- Ensure all valves and solenoids are working correctly
- Check all sprinkler heads for proper operation and coverage
- Check for leaks in irrigation lines and verify rain gauge is operational (if installed)
-
Make any necessary adjustments to the above procedures as needed
Mid-Season Check-up
If requested a mid-season or monthly check can be scheduled. We will check the entire system and make any adjustments or alterations that are required.
Fall Shut Down
At the end of the season we can take care of all the hassle of getting your system ready for winter. Here is what we will do during our fall shut down:
- Turn off the water supply line to the irrigation system
- Use compressed air to blow excess water out of system
Depending on what type of pump is being used we will also drain it down or remove it from the lake along with the suction line.